Videos

The NEW G7 is ready to go to work in tough materials!
https://www.garrtool.com/series-info/?SeriesID=1281

Speeds and feeds listed below.

G7
10mm x 70mm x 25mm 0.5mm CR
EDP 64522

Material: D2 58Rc
Machine: Doosan Puma DNM400

AXIAL: 25mm (2.5xD)
RADIAL: 0.5mm (5%)
RPM: 2740
MM/MIN: 1920

The NEW G7 is ready to go to work in tough materials!
https://www.garrtool.com/series-info/?SeriesID=1281

Speeds and feeds listed below.

G7
3/8" x 2-1/2" x 1" .030"CR
EDP 64514

Material: D2 58Rc
Machine: Doosan Puma DNM400

AXIAL: 1" (2.6xD)
RADIAL: .01875" (5%)
RPM: 2858
IPM: 78.06

WATCH: The NEW X7 in 304L. NOW AVAILABLE TO ORDER!
https://www.garrtool.com/series-info/?SeriesID=1283

Thank you, Arnold Machine (www.arnoldmachine.com) for shooting this footage. Speeds and feeds listed below.

X7
1/2" x 3" x 1-1/4" .030"CR
EDP 64154

Material: 304L
Machine: Mazak VCN 530C

AXIAL: .875"
RADIAL: .025" (5%)
RPM: 4023
IPM: 190.5

We can't wait for you to meet our growing family of high performance tooling!

GARR TOOL PRESENTS: The NEW G5 in action! NOW AVAILABLE TO ORDER!
https://www.garrtool.com/series-info/?SeriesID=1280
Push the limits in tough materials, 50-70 HRc. Speeds and feeds listed below.

G5
3/8” x 3” x 1” .020”CR
EDP 34776

Material: AISI A2 62 Rc
Machine: Doosan Puma DNM400
Holder: Rego-Fix powRgrip

AXIAL: 1”
RADIAL: 0.0188” (5%)
RPM: 3056
IPM: 38.2
SFM: 300
CPT: .0025

GARR TOOL PRESENTS: The NEW G5 in action! NOW AVAILABLE TO ORDER!
https://www.garrtool.com/series-info/?SeriesID=1280
Push the limits in tough materials, 50-70 HRc. Speeds and feeds listed below.

G5
10mm x 70mm x 26mm 0.5mm CR
EDP 34781

Material: AISI A2 62 Rc
Machine: Doosan Puma DNM400
Holder: Rego-Fix powRgrip

AXIAL: 25mm
RADIAL: 0.5mm (5%)
RPM: 3056
970 mm/min
Vc: 95 m/min
Fz: 0.0635 mm

WATCH: The NEW X5 in action! NOW AVAILABLE TO ORDER!
https://www.garrtool.com/series-info/?SeriesID=1279
Improve your run times and tool life with the X5 in materials up to 50 HRc. Thank you, Arnold Machine (www.arnoldmachine.com) for capturing this. Speeds and feeds listed below.

X5
12mm x 75mm x 32mm 0.5mm CR
EDP 31496

Material: 1018 Carbon Steel
Machine: Mazak VCN530C

AXIAL: 25mm
RADIAL: 0.6mm (5%)
RPM: 10570
14,750 mm/min

WATCH: The NEW X5 in action! NOW AVAILABLE TO ORDER!
https://www.garrtool.com/series-info/?SeriesID=1279
Improve your run times and tool life with the X5 in materials up to 50 HRc. Thank you, Arnold Machine (www.arnoldmachine.com) for capturing this. Speeds and feeds listed below.

X5
1/2” x 3” x 1 1/4” .020”CR
EDP 31519

Material: 1018 Carbon Steel
Machine: Mazak VCN530C

AXIAL: 1”
RADIAL: 0.025” (5%)
RPM: 10570
IPM: 581

We are excited to announce the upcoming release of our NEW X5 and G5 series! Our enhanced design meets material specific coatings, bringing you superior milling in tough materials!

GARR TOOL’s High Performance V4R series is an excellent choice for your slotting, profiling, ramping, circle interpolating & plunging applications. Available from stock in square end, corner radius & ball end. Visit www.garrtool.com to find a local distributor or contact GARR TOOL direct at 800.248.9003 for more information!