Reamer | Not evacuating Suggestions: Verify speeds and feeds Check coolant flow, location, and concentration Reamer worn
End Mill | Chip packing Suggestions: Check coolant flow and location Decrease axial depth Adjust speeds and feeds Use different style of end mill
End Mill | Chip welding Suggestions: Verify speeds and feeds Check coolant flow and location Use different style of end mill
End Mill | Chipping Suggestions: Check part rigidity Verify speeds and feeds Confirm concentricity of end mill in holder Decrease ramp angle or slow down approach Check coolant flow and location
Drill | Chip packing Suggestions: Add a peck cycle to clear chips Increase RPMs Reduce feed rate Check coolant flow and location
Drill | Chip welding Suggestions: Increase RPMs by 20% Confirm coolant concentration Check coolant flow and location
