While we don’t have t-shirts available for free, you can visit the apparel store we’ve set up through a company called Threadless. We’ll be refreshing the site with new designs regularly, so keep checking back. https://garrtool.threadless.com/ Note: We are unaffiliated with Threadless. They print and ship orders, we only supply the artwork. They have excellent […]
GARR TOOL does offer a few tools that are perfect for chamfering, although they are not specifically labeled as a chamfer tools. Drill Mill 154M/154MA (Available in 60°, 82°, 90°, and 100° point angles.) Spot Drill 1600 (Available in 82°, 90°, 120°, and 140° point angles.)
GARR TOOL offers a variety of different tool coatings, available on certain catalog items. Some coatings can be added to stock items. If a particular coating is not available by either of those options, you can request a quote. TiN (Titanium Nitride) General purpose coating – low heat resistance. Good lubricity. TiCN (Titanium Carbonitride) Good […]
Garr Tool Company Privacy Policy OUR COMMITMENT TO PRIVACY Your privacy is important to us. To better protect your privacy, the Garr Tool Company Privacy Policy describes data that Garr Tool Company and its subsidiaries, affiliates, dealers and agents collect, use, share, and store, including personal data (i.e. information that personally identifies you, such your […]
GARR TOOL catalog items can be found in the libraries of Mastercam, Fusion 360, GibbsCAM, ToolsUnited, and MachiningCloud. You can also find the 3D and 2D models of our catalog items on the individual pages of the GARR EDP on our website.
Chip Splitters are a designed to control chip length while maintaining a good surface finish. The splits are strategically placed on the cutting edge to maintain good surface finish while controlling the chip length. This process is enabled by newer software technologies. Chip Breakers are designed to break up the chip into smaller and more […]
End Users If you experience any issues with your shipment (damaged, lost, short, etc), please contact your Distributor. They will be the best resource for handling those issues. Distributors The fastest way to correct problems with an order is to call us directly. You can also email us and we’ll get back with you as […]
GARR TOOL offers a courtesy rate for expedited shipping. Contact your Distributor for more details.
Please note: GARR TOOL will only accept our own tools for regrind services. We do not perform this service for competitor tools. All Regrinds are processed through your preferred Authorized Distributor. If you don’t have one, you can find one by clicking here, or call us at 800-248-9003 and we can help you find one. […]
GARR TOOL Return Policy (standard catalog items) Effective January 1, 2012, each Distributor is allowed six (6) returns per calendar year, without a restocking charge. Restocking charges can be, but are not limited to, the following: Stock returns in excess of six (6) per calendar year can be assessed a $25.00 restocking charge per return […]
